. Product characteristics:
1. surface hardness: SL series metal needle cloth surface hardness up to Hv 900.
2. good wear resistance: SL series metal needle cloth friction coefficient is small, good non adhesion, high abrasion resistance.
3. high degree of finish: surface adopts the advanced processing technology, tooth surface finish, surface roughness Ra is less than or equal to 0.2, the tooth tip is sharp, no burr, no damage to fiber, short maturity..
4. corrosion resistance: this series of needle cloth as non oil cloth, particular corrosion resistance by sulfuric acid, hydrochloric acid, caustic soda, salt water test, compared to the same period, the corrosion rate is lower than that of 1cr18Ni9Ti stainless steel.
5. profile design reasonable: SL series metal needle cloth can more effectively meet the combing separation and transfer of the fiber roller, and neps dropped greatly, evenness quality.
6. has long service life: the processing technology of SL series metal needle cloth application can ensure the tooth tip part has a very high hardness and abrasion resistance. Compared with the high carbon steel materials used in the past, the use of life more than 3 times.
two. Products
combing roller with metal needle cloth
ordinal type company code H1 Delta P B1 spinnable range of
1 OB20A SL3625 * 2190 3.60 65 2.13 0.90 cotton, wool and cotton, the main component of the blending material
2 OB20B SL4025 * 2110 4 65 2.13 1
3 SL3625 OK40 * 2690 3.60 65 2.62 0.90 cotton and cotton accounted for the main component of the blending material
4 SL3600 * 5090 OK37A 3.60100. 4.95
5 0.90 synthetic fiber SL40-10 * 5010 OK37B 4.00100. 4.95
6 1 SL3600 * 4590 OK36 3.6090. 4.49 0.90 blended raw material
7 SL3615 * 3990 OK61 3.60 75 3.93 0.90 polyester / cotton, fine cotton, cotton / viscose / viscose, sunny, sunny /
8 SL3612 * 3090 OS21A 3.60 78 3 0.90 blended raw material
9 SL4012 * 3410 OS21B 4 78 3.38 1 polyester / cotton, polyester as the main raw material
10 SL3600 * 3990 MK88 3.60 90 3.93 0.90 polyester / cotton, polyester and a high proportion of blended raw material
11 SL3600 * 5590 CM-2A 3.60 90 5.46 0.90 chemical fiber raw material
12 CM-2B SL4000 * 5510 4 90 5.46 1
13 SL3625 * 5090 OK74A 3.60 65 4.95 0.90 cotton, recycled fiber coarse yarn
14 SL4025 * 5510 OK74B 4 65 5.46 1
Jingjiang Jingrui textile Audio Supplies Company Limited
address: Jiangsu Jingjiang Gushan Town zip code: 214500
phone: 0523-5114166 13515168765 contact: Mr. Xu
