Shenzhen rubek precision electromechanical Co., Ltd.   

Reubaker (ribake) high pressure fan has the following properties: it is easy to install. The high pressure fan can be installed at any place at any time for use in compressed air or vacuum. And it can be installed horizontally or vertically in any direction. High reliability except for impeller, high pressure fan has no other parts, and the impeller is directly connected to motor, no gear or belt drive, so it is reliable and almost maintenance free. The machine has high precision and low vibration, and the other parts of the rotary part are designed through a very precise balance, so that the vibration rate is very low. The scope of application and service: the high pressure fan is mainly used in gas transportation system; vacuum lifting and clamping system; packaging machine; sewage plant ventilation; bagging / bottling / filling system; soil improvement; foam forming system; food processing system; laser printer; dental vacuum suction machine; paper processing system; loom and so on. The working principle of the high pressure fan is: the high pressure fan is a swirling air pump for both suction and suction, and the special blade design of the fan has the characteristics of high pressure, large air volume, low noise and high temperature resistance. The pressure fan has strong insulation performance, easy installation and high stability. The passed gas is oil-free and dry, with the highest quality. High pressure and high suction are generated by the unique design of the impeller. The impeller of the compressor has many blades at the edge. When the impeller rotates, the air in the two blades move rapidly to the outer edge due to centrifugal action, and the energy is transferred to the outside. When the wind pressure is superimposed quickly, the speed increases. When the air is re introduced into the impeller by the duct, it will be accelerated again. Because of the energy transferred by multiple blades of the pressure blower, the wind pressure is superimposed quickly, resulting in high pressure or high suction. The high pressure fan and high pressure fan of the dryer are also called circular blowers. They have two functions of air supply and air suction. The SIEMENS technology is adopted, and the gas is oil-free and dry, which is suitable for auxiliary equipment in many mechanical industries. The mechanical precision of the fan is very high. The parts of the revolving part are designed and tested by a very precise balance, so that the vibration rate is very low. The heat dissipation and good multi wing aluminum alloy radiator shell can rapidly dissipate heat to enhance the efficiency of the motor. The blower body and the motor housing are separately cast. The seal and dust-proof design between impeller and shaft part can prevent dust design from entering and prolong the service life. Products are well received by many customers around the world. Maintenance and maintenance method: 1) the motor of high pressure fan is directly connected with the impeller and belongs to high speed. The bearing needs to add butter to maintain regularly, so as to prevent damage (including impeller bearing). 2) the shaft power of the motor is directly proportional to the pressure. In order to prevent the long term limit pressure from increasing the shaft power and overload the motor, the relief valve is often used. It is a unloading valve. When the pressure of the high-pressure fan exceeds the pressure set by the relief valve, the relief valve will automatically open and release the excess pressure, so as to protect the motor of the high pressure fan. 3) the internal mechanism of the high pressure blower is relatively tight, and the gap between the impeller and the shell is very small, so debris and dust should be filtered. Generally, a fine screen / filter is installed on the intake port. It uses different filters with different filtering accuracy according to different use sites. 4) in some special occasions, special protection is needed: for example, when ventilation is used in the sealed environment, ventilation and heat dissipation should be noticed; when the ambient temperature (high intake temperature is high), more attention should be paid to ventilation and heat dissipation or high pressure fans with higher inlet temperature. The main points of application are: when the high pressure fan is running, the current consumed by the motor will increase with the increase of pressure and vacuum degree. If the current exceeds the assembly, the trip will occur. To prevent tripping or save electricity, please increase the cross section of the outlet as much as possible, or install the air pressure regulating valve on the suction or exhaust side. A. air inlet and inlet should be equipped with filter 1.. The total cross section area of the outlet hole should be 1/2 larger than that of the fan outlet section. If 2. is used for water aspirated, the water depth pressure should be below 70% of the maximum static pressure value in the catalog. When 3. is pressurized and aspirated, the outlet temperature is normal due to the air friction, which is more than 10 degrees normal. Therefore, the 1M should be used above the iron pipe. B. suction air outlet - muffler can be installed at the outlet. The total area of the suction hole should be 1/2 larger than that of the blower inlet.