hot melt adhesive film
polymer environmental protection hot melt adhesive film has two sides can then characteristic, smooth surface without adhesive, has a series of advantages of adhesion is quite strong, cold resistant, resistant to washing and dry cleaning, acid and alkali resistance, resistance to tension, the melting point is moderate, and so on, in a few years we have successfully developed a hot melt adhesive of high frequency voltage PVC, leather, metal and so on hard bonding, fill the blank.
1, hot melt adhesive film series
A, for all kinds of printing trademark, embroidery badges, PVC, leather, adhesive, special high (low) temperature hot melt hot glue.
B, the clothing for compound film, waterproof membrane, high and low temperature membrane (sealing), elastic and PVC adhesive film for various purposes such as hot-melt adhesive film.
C hot melt adhesive, hot (hot glue) A: Embroidered badge with hot melt hot glue B: textile fabric composite with hot hot hot melt glue C:PVC high frequency voltage for hot melt adhesive film D: do the tongue standard special hot melt adhesive film
embroidery supply hot melt lining the bottom (instead of paper Park)
* low temperature and low pressure stripping (100 C and 130 C for about 2 to 3 seconds)
* embossed, hole particle plays a flower car prevent cloth sliding and displacement ventilation, degumming, degumming clean and not sticky cloth.
* fast dissolving, no odor
* applies to all surface of Budd Chiari
* sliding, less number of embroidery needle broken car, durable, not easy to be broken blunt tip, will not cause the car to spend with a pumping brakes and rag phenomenon. High production efficiency,
* delivery speed, reduce manpower. 10 embroidery machine to normal production, enough for 2 to 3 workers, the effect is good and clean without blemish.
* is easy to tear away, without high pressure stripping
* directly can stitch, environmental non-toxic, clean, the shuttle bed and other parts of effective maintenance, prolong the life of the machine, factory hygiene, upper respiratory hazards to workers.
* relative to the material and the processing of
