Zhejiang Zhengqi Plastic Chemical Co., Ltd. Shanghai Office   

Our factory is the production of UV curing of UV glazing oil is a professional with ultraviolet photosensitive resin, with light initiator, addition agent by composite reaction processed. Compared to the products with traditional glazing oil, has strong gloss, do not fade, do not change color, fast drying, size stability, dry non-toxic, facilitating environmental protection etc.. Can be widely used in roll coating on PVC products. After the product after the surface gloss light PVC not only has the magnificent, but also can increase the heat, moisture capacity, to protect the imprinting and the function of commodity. A product performance 1 appearance: colorless viscous liquid viscosity: 2 25-45 seconds /25 C 3 solid content is greater than or equal to 80%: 4: the curing speed of 3-5 seconds (80W/cm x 15cm lamp subtalar) 5 gloss: = 90% 6 fineness is less than or equal to 5mm two. The use of this product, should pay attention to the clean surface of printing material. The use of this product such as the viscosity is too large, we provide special diluent may be available accommodation, shall not use the solvent instead of. Three. Note the strains of UV curable products, should be stored away from light. This product after drying non-toxic tasteless, in the skin in the process of operation with this product, use soap or detergent cleaning. When using this product, good ventilation environment application and clean working area. Four. Use 20kg iron ladle product packaging.