KeyWord: Brand:

Dongguan Qin Xin Technology Co., Ltd.    No Member

 Dongguan Qin Xin Technology Co., Ltd. Brand
Business Model
Founded
Introduction
1. Company Profile: Dongguan Qin Xin Technology Co., Ltd. is a provider specializing in intelligent system integration, enterprise information management system R & D, application and information technology management consulting solutions. It is committed to applying advanced technology such as RFID (radio frequency identification) to the field of garment production management, helping garment manufacturers to get the leading production management technology and improve the efficiency of the factory. "High quality is the life of an enterprise". The company has top talents in the domestic information industry and many management systems development engineers with rich experience in the industry. It always grasps the development trend of domestic industry and grasps the advanced frontier development technologies. The team of Ruixiang Technology is becoming a strong technical support for China's IT industry. Relying on Ruixiang Technology in the field of domestic apparel industry's most perfect technology management expert team and experience, and customer professional, dedicated, dedicated quality services. To create a solution provider to provide real-time information management solutions for garment production enterprises to help customers improve production management efficiency. Since its inception, the company has built up its business philosophy of "knowledge creation, wealth and technological innovation service", providing service, integrity, innovation, network and efficiency as the basic cultural elements, providing professional modular design, complete solutions and perfect after-sales service for customers. Two, e-tag and information technology review. The E-tag project is based on our company's platform, which integrates the advanced management experience of hundreds of garment and footwear industry in China, and the integration of ID technology and data acquisition technology. It is mainly used to solve the wage calculation of workers in the workshop, analyze the production bottleneck and improve production efficiency, closely contact managers and production line staff, and track the operation of products in various links such as sending and receiving, so as to prevent mistakes. Three. At home and abroad, the characteristics of garment industry and the trend of information technology and trend are: China is a big textile country in the world. It has concentrated a large number of middle and low end clothing suppliers in the world. There are only 3000 registered garment enterprises in Dongguan. If there are garment enterprises in Dongguan, Shenzhen, Foshan, Zhongshan and Guangzhou, there are tens of thousands of garment enterprises. In this field, there are large and small garment enterprises, and the informatization construction of the clothing industry is uneven. But it can be divided into the following stages: the initial stage of 1 (manual computing): that is, workers will record their products, quantities and processes in their books. This stage is the most primitive stage of HSI. All jobs require workers to count manually, and then calculate wages by specialized personnel. There are still a lot of small scale (less than 100 people) processing manufacturers, which still use this method. This method can only be used in small scale manufacturers, otherwise the workload will increase exponentially. The drawback of this method is that once a certain number of processes is found to be abnormal, it is difficult to track which worker and what problems arise, which may cause unnecessary wages. 2 stamp stage (paper label stage): namely, the worker's work ticket (label) is stamped on a fixed piece of paper with the stamp pattern, and each label is marked with a large label. Then each process is marked with a small label. When the worker is producing a certain process, the scissors are used to cut out the small labels of the corresponding processes as the vouchers for the number of their own products, and then they are unified to the computer (or manual). The total number of statistics is calculated according to the wages. This method is much more advanced than manual counting and avoids the problem of super number of processes. However, a large amount of manual input is still needed. 3 half computerization stage (bar code label phase): namely, with the help of computers and printers, it will print out the labels of every label on each label in the process (divided into: needle printers, laser printers, professional printers, etc.), each printer costs differently. In the process of production, the workers will cut off their own process bar code with scissors according to their production conditions, and use them as production vouchers. This method has taken a big step forward than the stamp method, because it has made use of the means of computer printing, such as canceling handwork, increasing efficiency, and information system such as software system. It has the following improvement as compared with the previous stage: A: eliminating manual input, greatly improving the accuracy of raw data. B: by analyzing the bar code with the help of software system, it reduces the unnecessary manual calculation and greatly reduces the workload of the wage calculation staff. C: with the aid of scanning equipment, data entry has been greatly reduced and the work efficiency has been greatly improved. The bar code label is raised to a higher level than the seal label, but there are also unavoidable disadvantages: A: the real-time performance is not high, because the labelling ticket of the worker is needed to be uniformly scanned, so there is a time difference between the scanning time and the actual production time, so the data can only calculate the wages. B: depending on the scanning equipment, different scanning equipment has different bit error rate. Different scanning devices have a certain bit error rate. Therefore, different scanning devices have corresponding error codes. However, any barcode error is a direct result of economic losses, which will cause dissatisfaction among the relevant personnel. C: workers and wage payroll still have a lot of work. The workshop workers still need to carefully cut the bar code (very carefully), and calculate the wage staff still have to scan all the bar codes without omitting the computer. D: the effect of scanning depends heavily on the effect of printing. The printing clarity of the printer seriously affects the scanning effect. The clarity of the printer is not high. The laser printer will affect the effect very much when the carbon powder is thin. E: the tag cost is high. The cost of the label is mainly from: printer supplies, paper supplies, scanning personnel salaries, and these costs are continuous, and every month will exist. It is a long-term investment F: paper waste is not in line with the environmental protection requirements of social development. When the scanning is completed, the paper label will lose its use and can only be garbage disposal, so that every enterprise will continuously waste social resources and continue to occur. 4 automation phase (electronic tag stage) tag is based on ID card technology and data terminal acquisition technology, the information of each tag ticket is stored in ID card, workers according to their own processes, through the collection of terminal ends, the number of products, processing content (processes) and other information directly sent to the computer to complete the labeling work. The electronic tag solves the problem of real-time information. Under normal circumstances, workers need to cut the work ticket with scissors and pay the time at the specified time, and calculate the workers' salary to scan the label into the computer, so that the intermediate journey time is at least one day, and even more can reach 1 months. Of course, it does not affect the calculation of wages. However, the workers do not know whether the computer is scanning the computer, and whether there is any omission. When the salary is released at the end of the month, it is found that it needs to be checked through cumbersome checks. The electronic label device will complete the process directly, enter the computer directly, and display the results to the workers, so that the workers can know whether the goods are paid for themselves. This method has the following advantages: A: high real-time. This information not only gives the workers a salary calculation, but also strengthens the information flow of the enterprise. The top management can see the production progress of the product in the workshop, the completion status of each process, the reasonableness of the process arrangement, and the daily production table of each group has been withdrawn from the history, because the computer knows it in advance and does not need manual reports. Every worker through these tracking information (when the product is being produced), completely track whether the workers are familiar with the lathe workers, whether they are lazy in the workshop, analyze the efficiency of workers' work, compare with the employees in the process, and increase incentives for workers. B: security and stability bar code labels are subject to the clarity of bar code. ID card is to transform information into digital mode for transmission. The bus adopts 485 communication mode to ensure data security and stability. C: information sharing. Electronic tags establish a connection channel for managers, company executives and workshop front-line workers. Each worker's production schedule can be directly fed back to the manager, and the instructions of supervisors (such as notifications) can also directly reach the worker's screen, so as to establish a contact bridge between workers and high level D: analyze the flow of water, solve the problem of whether the process arrangement in the clothing production process is reasonable, and whether the deployment of various electric vehicles is reasonable, which greatly affects the production efficiency. The original raw data computer obtained by electronic tags directly notify the relevant personnel in the form of charts and LCD large screen, and can reasonably allocate processes and personnel according to figures and experiences. E: cost saving ID card is recycled. After the production is completed, the ID card can be recovered and can be used for the next product. The cost of printing consumables and paper will not happen every month, and the job of scanned personnel can be cancelled. This saving is continuous, and the benefits to the company are increasing. F: improving management company's information fluency will bring about the improvement of management, for example, managers can conveniently see the progress of each product, the production schedule of each product, and who will produce and produce at any time. Quantifying and summarizing information that was difficult to quantify before analyzing problems and avoiding mistakes in advance. G: recycling, the recycling of green ID card saves a lot of paper resources. Every garment enterprise is very clear that the paper label will produce a lot of production every month and finish the paper label of the production mission. The tag is very consistent with our current green policy.
Main Products
Contact information
Contact:   Mr. Yu Qin
Tel:  
Addr:        Tianyuan computer city, Humen, Dongguan 3010