Wuhan Union of science and Technology Co., Ltd.   

        in the clothing industry, handbags, shoes, toys industry such as manufacturing industry, industrial sewing machines (industrial sewing machine) is widely used, but also the enterprise's main production equipment. But in fact, including flat car, double needle car, button, knob door car car and some special machinery and equipment included, the motor (motor) use rate is very low. For example, flat on the job, basically only when sewing needle in the cloth sewing, use to the motor, workers in the finishing piece and not on the cloth sewing needle, motor basic work in the idle state (no power output). The test results showed, flat cars, double needle car in the working state, the real time motor use about half, in 35% - 68%, in view of this phenomenon, industrial sewing machine electricity saver successfully developed using inductive coupler and micro electronic technology, this product specifically for the waste phenomenon in the work of the motor power, using microcomputer processor, real-time detection and calculation of real power to the motor, according to the actual load of the motor to control the size of the output, in the absence of power (motor no-load condition) the saving rate up to 40%-60%; the average saving rate reached 25%-45%
power-saving principle features of
1. real-time energy saving control technology of
        application of microcomputer chip, real-time detection of clothes vehicle motor load on the actual operation, optimal control of clothes vehicle motor, greatly reducing the motor in the empty load power consumption phenomenon. Has the effect of power saving equivalent of imported and domestic equipment. According to the actual use of energy saving effect of 25~45%.
2. low speed separation bonding technique
        completely change clothes vehicle motor and clutch plate between in the operation process of the high-speed instant bonding wear and tear, the use of this technology, can make the bonding state of motor and clutch plate by high speed bonding the original change for low after joining instantaneous start acceleration process. To avoid much of the clutch plate instant high-speed abrasion, prolong the service life of 1--2 times the clutch plate.
3. drop heat antifriction technique for
        change clothes vehicle motor in the original state of the no-load large power, reduce the use of power intelligent empty (absolutely no impact on the using effect cases), the motor temperature drop of 15--32 C (measured), anti high temperature less motor coil aging, prolong the service life. At the same time can be greatly reduced because the motor in more than 50% of the no-load state of the bearing high speed rotation caused by wear and heat energy loss, reduce the motor is running at high speed, reduce the heat. Thus can greatly prolong the service life of motor bearings.
4. to optimize the work environment
        because of the use of electricity can make the motor temperature decreased 15--32 C, 5~7db noise decrease.
5. real time detection and protection
        using the circuit protection perfect, so to minimize the loss of equipment fault.
6
7, performance is stable and reliable, small in volume, beautiful appearance, convenient installation.
8, the service life of 10
Product Series: YC/220  (500W);             YC/380 (500W)
object of application: suitable for electricity of various single-phase and three-phase electric industrial clothes vehicle motor control.