1 two or three cylinder drying machine, the equipment investment is required to imported products 1/6.
2, to ensure that the material with moisture is below 0.5%, dry mixed mortar and slag powder production line product of choice.
3, cylinder self thermal insulation thermal efficiency can reach above 70% (the traditional single cylinder drying machine thermal efficiency is only 35%), heat efficiency is increased by 35%.
4, fuel oil, gas, coal, can adapt to the. Can bake below 20mm block material, granular and powdery materials.
5, than the single cylinder drying machine to reduce the area of about 50%, the investment of civil engineering is reduced by about 50%, the power consumption was reduced by 60%.
6, according to the requirements of users can easily control to final moisture index.
7, air temperature is low, dust removal equipment used for a long time.
8, without size gear transmission, using the wheel drive.
three, three cylinder drying machine structure and principle of
three cylinder drying machine is the introduction of our today's advanced technology from Germany, consisting of three concentric cylinders with different diameters according to certain mathematical relations and structural forms, mutually block is formed by the combination of. The three cylinder drying machine for coal, oil, gas and other fuels, and can dry bulk, granular, powdery and other materials, in line with the state to create environment-friendly, resource-saving society policy, environmental protection and energy saving type product to replace traditional drying equipment.
three cylinder special structure, the inner cylinder and cylinder is surrounded by the outer cylinder to form a self insulation system, internal surface of a cylinder body, in the distribution of heat involved in the outer cylinder of the material in the heat exchange, and the outer barrel and is at the low temperature end of the heat flow, so the cylinder the heat radiating area and heat loss was significantly lower. Energy saving type three cylinder drying can fully utilize the residual heat, reduce heat loss, increase the heat exchange area, the unit volume of the evaporation intensity of drying machine is greatly improved, thus effectively improving the heat energy utilization rate, reducing energy consumption, so that the thermal efficiency of three cylinder drying machine can be greatly improved.
Main Products
Contact information