Wuxi Sanhuan Instrument Co., Ltd.   

        Brooks
BROOKS Brooks flowmeter Chinese American company thermal mass flowmeter is designed to meet the requirement of the measurement precision, repeatability and control the process and product of design. It is different with the traditional instrument volume flow, BROOKS mass flowmeter by specific heat measured gas to flow measurement, not affected by changes in temperature, pressure. Therefore the products in a variety of different work environment has high accuracy. The measured flow can be designed into a mass or volume unit. In addition, all BROOKS INSTRUMENT mass flowmeter products are compatible with the existing industrial instruments, easy to install.
technical parameters:
digital signal to analog signal output, can directly display control by computer, can be matched with a single / four / eight channel display controller
medium: optional H2, O2 and other non corrosive gas or SiO2, SO2 and other corrosive gases
flow range: the big working pressure of 0.03 100slpm
: 1500psi (10.432Mpa
pneumatic joint): 1 / 4 or 1 / 4 \ "VCR \" SWG
electrical connector: 15 Pins D Type or Card edge
accuracy: + 1%FS
signal output: RS 232 / RS 485 interface, 4 20mA output control, TTL alarm
built-in microprocessor, intelligent, digital. Configuration software, digital communication, support Microsoft Windows dynamic data exchange.
flow range: 0100L / MIN;
: 1%FS;
the accuracy of maximum pressure: 1500psi;
maximum temperature: 65 C;
input / output 0-5V:
power supply: + / 15V
051088701706
www.wxsyyq.com;