Introduction
FU804 rubber grinding machine features: the machine is suitable for a wide range, suitable for various types of sharpening hardness, textile roller, printing roller, all office equipment cots, also suitable for plastic parts, nylon, bakelite pieces, Muzi parts, rubber roller workpiece excircle sharpen; such as: polished round printer, copier, fax machine roller roller roller, rubber roller offset press rollers abroad. This machine is a kind of special roller cylindrical grinder, the use of flexible, high efficiency, air holes by sharpening grinding wheel and external big suction device, there will be no oil, water stain contamination rubber workpiece during operation to ensure a good working environment. the main technical parameters:
1
a, headstock part, spindle speed 340r/min
b, 140mm
c, the height of the center; the front adjusting rotary range of 0-300
d, maximum grinding workpiece length 450mm
e, maximum grinding workpiece diameter 120mm
2, part of
a, the work table longitudinal cutter speed 528mm/min 838mm/min
b, the largest reciprocating stroke 450mm
3, the largest amount of tailstock telescopic part
the tailstock thimble; 16mm
4,
a, the rotating speed of the grinding head grinding head part 2100r/min
b, the grinding wheel specification TL60R2A/P300 * 25 * 75c 60# large pores;
d, a hand wheel feed rate 0.01mm/
e, the lattice rotation angle of grinding wheel seat 0 ~ 900
5,
a, vacuum cleaner parts of blade speed 2800 R / min
b, motor Y802-2 0.75kw /min
c, 2800 RPM airflow 700m3/h
Main Products
Contact information
