Industry Ming printing screen printing equipment   

Usage: use 1 the A solution: B liquid =1:1 proportional allocation. 2 screen two times after exposure, with a sponge or soft cloth the dura mater after mixing evenly coated on both sides of the screen agent, pay attention not to large area flowing. 3 placed 1 minutes, the dural agent will screen penetration. 4 using the airbrush excess dural agent or blown off with a clean soft cloth, the extra dural agent dry. Note: if there are extra dural agent residue on the screen surface, will make the photographic film to form the membrane surface, affecting the printing effect. 5 will screen into the 40~60 DEG C oven dry in 30 minutes or more, is not dry completely or the temperature is too low, will cause the reduction effect