Jiangyin Xinglong garment fabric repair Co., Ltd.   

Jiangyin Xinglong garment fabric trimming Co., Ltd. is a professional garment manufacturer for many years. Fabric finished color. The color fastness of dry and wet rubbing was improved. Color fastness to sweat increased. Removal of azo, heavy metals and formaldehyde. Anti pilling treatment. PH adjustment. And so on. Our company has the following business: after the 1. fashion is finished, it is found that the color difference between the front and back buttons, collar, sleeves, trousers and so on can be accurately decorated by the color difference of the left and right sides, the color difference between sides, the shade of yin and Yang, the color difference of water and wash, the straight lines, the white spots, the white spots, the black and white strips, the sand roads, and the poor printing and dyeing. 2. fabric itself has serious color difference, longitude and latitude color file, color bar, color spot, edge difference, cylinder difference, deviation, segment difference, erythema / macula / leukoplakia / glue / stain, etc. it is difficult to make coloring treatment, or color, string color, fade, resulting in staining pollution. The chromatic aberration caused by the dilute and secret path of 3. fabric during manufacture. 4. water washing plant, due to the washing process or other factors, resulting in color difference, color bar and Yin Yang color or after washing, leaving on the fabric of the poor, side difference, color bar pawl printing, black / white stripe, color bar, yin and Yang color difference, poor film, sand wash marks, holes, ordinary spray gun water can not be removed stains. 5. fabric is not fastness to color, stains found after clothing, and it is difficult to remove stains from fabrics with spray guns. 6. fabric stains, cleaned by decontamination, due to excessive injection pressure or spray water corrosion caused by the color change position and normal color difference (such as leukoplakia, etc.). 7. fabric has serious or unknown stains, and it is difficult to wash it with spray gun. 8. wool / cashmere, the fabric has obvious film and fabric defects (sand channel, spinning,), and fabric value. 9. fashion fabrics, with excess adhesive or excessive ironing, cause severe Aurora phenomenon. In the 10. dyeing and finishing plant, the cylinder head, cylinder tail and left and right chromatic aberrations of the color fabric are produced in the same dyeing cylinder. The color difference between line and line, line and fabric caused by material or various reasons in 11. embroidery / line factory. 12. printing plant, regardless of mucilage / water slurry, misprints or imprints of the pattern, need to completely remove the pattern; because of the problem of printing, printing problems need to be repaired. The 13. silk factory can remove the fading or yellowing caused by long exposure to the sun or the light, or the water marks left by the spray gun water can be disposed of when other fabrics are removed. 14. clothing factory, wool fabric is valuable, but also has chromatic aberration, or due to excessive ironing, caused by Aurora, or due to residual adhesives, leakage out of the lining. 15. underwear factory, children's wear factory, color supplement materials can be safely used without formaldehyde, which can provide safe formaldehyde free decontamination or color treatment. It can help remove excess formaldehyde. Our company can repair and remove these problems encountered in clothing, cotton, linen, rayon, fiber, sweater and so on. Ensure that it achieves good results. Our company is committed to: the complementary color material used is fully in line with the environmental protection requirements of ASTM. Color can be directly added to fabric to ensure color fastness.