Suzhou shenxie laser equipment Co., Ltd.   

Our company is aiming at the special cutting machine for cutting and embroidery after cutting and embroidering in the computer embroidery process. In the traditional processing technology, the defect of the cutting mode used before cutting is that it is easy to produce the fabric edges, and the machining accuracy is limited by the cutter die, the opposite shape is difficult to process, the production cycle of the knife mold is constant and the cost is high, which restricts the development of cloth embroidery. After cutting and embroidering, cutting is mostly done by the hot working method, which has the disadvantages of large gap, yellow edge, hard edge and difficult alignment. Depending on the manual hand cut, it is easy to spread the edges and produce waste. Laser processing provides you with a new choice. Because of the high laser focus, the light spot is thin and the thermal diffuser area is small, so it is very suitable for cutting the textile fiber fabric. It is widely used for most fabrics, smooth, flex, automatic, no distortion, no yellow edge. Graphics can be designed and exported by computer, no need for knife die, high efficiency. The whole machine can work at 24 hours and the production cost is low. This makes laser processing a recognized alternative in the industry. It is suitable for garment and garment factories, jeans factory, computer embroidery factory, leather, luggage factory, plush toy factory.