Weifang Pu Wun run environmental protection Polytron Technologies Inc   

Shandong Pu Yun run environmental protection Polytron Technologies Inc 1, the company promised (1) every sample of our company is from the factory's products, the majority of customers can keep samples sealed for inspection, a penalty of ten. (2) the company has a number of engineering and technical personnel, will be enthusiastic to provide you with 24 hours of service consultation, and provide free micro electrolysis process and tank body, pool drawings. (3) under the condition of pH 3-4, the annual loss of filler in our company is less than 15%. This data has been verified by the Environmental Laboratory of Zhongshan University for more than half a year, and has been verified by many customers. Note two: caution: (1) micro electrolysis fillers that are not in use should be kept dry to avoid soaking or wetting. (2) the microelectrolysis packing has been put into use. After the project is stopped, it still needs to be soaked in waste water, not exposed to air, so as not to oxidize. (3) periodically backfill backfill to improve the treatment effect of filler. (4) the pH value of filler is theoretically the best in 3-4 cases. The lower the pH value, the corresponding increase in filler loss. However, the setting of pH value for certain wastewater must be determined based on the test results. The product description information of the microelectrolysis packing may not be detailed enough and comprehensive. If you need to know more about the relevant information of the microelectrolysis packings or get the relevant information, please feel free to contact me at any time. Your customer's needs are our goal. Your inquiry is our greatest concern and support. Our company is always ready to serve you for your friends' standing data and samples, and looks forward to your valuable suggestions.