Beijing tianruiyuxiang International Trade Co., Ltd.   

Sprue removal machine is used for gray iron, ductile iron, aluminum cast iron castings. Grey cast iron and nodular cast iron brittle material ratio, now use a hammer to break the gate. Nodular cast iron for viscous material, strong, with a hammer will not break, not only inefficient and dangerous for casting is damaged, therefore to remove the machine with riser which can improve working efficiency and the rate of finished products, and can save expenses for foundry enterprises to increase the income of enterprise. Riser separator in does not damage the product under the condition of casting sprue, runner will be redundant partial separation. Used for gray cast iron (FC), spheroidal graphite cast iron (FCD), alloy cast iron, cast steel (low carbon steel, high manganese steel castings, easy operation etc.). Mechanical operation instead of manual hammering or cutting, not only greatly improve work efficiency, reduce the casting cost, also make the working environment is improved greatly. Does not produce noise and splash by hammering the reactionary, only mechanical action voice, so quiet, safe, efficient operation to become a reality. Sprue cutter used for cutting the sprue, runner and riser, waste. Cutting outside except for the above cast iron material of the equipment, but also can be more widely used for cutting steel and various alloy material. The workers from heavy physical labor. Many broken broken machine for flow, but also can be used for cutting the riser. With the broken machine will runner scraps of large size cut to facilitate the recycled reuse. The equipment is divided into manual type and fixed type The characteristics are as follows The 1 model is rich, can according to the destructive force of size selection The 2 opening greatly, gate off easily. The elimination of internal injury, improve the rate of finished products. 3 in order to improve the operation, hydraulic hose in one place 4 balancer can be used in conjunction with the hook, make the operation more easily 5 consumption of easy replacement 6 without damage products, cut off the gate and riser, cross gates 7 according to use can replace the wedge claw, a standard type and a MM type (blade extends wedge claw type) wedge claw is segmented not slip. In order to improve the operability, wedge claw can rotate, so workers in the operation without moving, wedge claw can also automatically return to the in situ 8 safe, no vibration, no noise, dust, high performance, high efficiency, high quality, continuous work 9 lightweight design makes the operation simple, and even without the need for skilled workers, but also easy to carry 10, improve work efficiency, save for the foundry business spending to increase the income of enterprise. Hope that the majority of customers to obtain information: 18611985481 010-89519891 13601372883