Linzhou Hongxiang Machinery Equipment Co., Ltd.   

Linzhou Hongxiang Machinery Equipment Co., Ltd is located in be known to all the world's artificial Tianhe Hongqiqu bank, covers an area of ten thousand square meters, has a group of high-quality professional technical personnel and staff, equipment, have the 500KG furnace two, a 5T cupola, lathe, drilling machine, milling machine, planer, and other equipment several, and the welding processing equipment. Our company has the processing capacity enough, in the premise of ensuring quality, timely completion of delivery task. Linzhou Hongxiang Machinery Equipment Co., Ltd. was founded in the late seventy's, is the first production of the crane, rail accessories professional manufacturers, in the early ninety, to establish a long-term stable cooperative relationship with Ministry of machinery and electronics industry, by the National Building Standard Design Institute published 95G325 atlas included in the recommended products (see 95G325 Atlas of the factory name and product introduction). Rail fixing pieces produced by our company, is suitable for the concrete crane girder, steel crane beam, designed strictly according to the G-325, G514, 95G-325, 04G-325, 05G525 and the Ministry of Railways 3150 standard production. Our company products Three Guarantees, heavy contract, keep promise, warmly welcome friends from all walks of life to visit our company to negotiate business. Quality policy: quality and integrity, allows users to rest assured. Marketing concept: rely on quality to enter the market, with the credibility to make friends. Enterprise spirit: learn widely from others'strong points, self-improvement, pioneering spirit, the pursuit of excellence. Scope of application: apply to a reinforced concrete crane beams or prestressed concrete crane girder industry workshop and open-air Zhanqiao, its scope of application: plant spacing: 6.0m 12.0m 0m the crane lifting weight: 1t~125 soft hook crane composite rubber pad surface temperature is less than or equal to 60 DEG C: often the seismic fortification intensity is less than or equal to 9 degrees: Corrosion: no corrosive gas plant. When erosion measures should be taken according to the provisions of article 1.9. Plate (scheme a) model selection and inch scale (table) (two) with materials and requirements (1) plate Plywood and steel with Q235 steel (steel 3), its technical conditions shall be in accordance with the standard provisions of the state. (2) six hexagon head bolt and nut spring washer Washers shall be in line with national standards, regulations. (3) plate made of carbon steel castings (ZG230-450) or malleable cast iron (KTZ450-06), its mechanical properties shall meet the requirements in table 1. (4) the elastic plate using composite rubber pad, rubber tongue and rubber backing plate is made of oil resistant rubber, its performance shall be in accordance with GB5574-85< industrial vulcanized rubber plate > 3807 standard, the mechanical properties of rubber plate shall meet the requirements in table 2. (three) installation requirements (1) completed the laying of track rail joint positioning adjustment good composite rubber pad, and the bolts and clamp parts into position, make the plate tightly towel rail flange mounting plate, spring washer, then, tighten the nut to press plate rubber tongue compression is about 2-3mm. (2) the track installation requirements of the allowable deviation of the center line of the track position deviation is less than or equal to 5mm; track top standard height difference is less than or equal to 5mm; deviation less than 5mm distance of two tracks between center lines; transverse the same position two rail top surface relative elevation difference; pillar is less than or equal to 10mm The other point is less than or equal to 15mm (3) at the four hole of rail by splint connection joint workshop extension. Can adopt the flat joint seam of steel track 4kg/m, 38kg/m, 43/m, QU70, QU80, 50kg/m expansion, QU100, QU120

Rail parts, mining equipment, rail fixing device, fixing piece of the track, the track connections